Bluesound RC1 Remote Control at Vinyl Sound Buffalo, NY

The RC1 is an infrared remote control from Bluesound (Mississauga, Ontario, Canada), available at Vinyl Sound in Buffalo, NY. Pre-programmed with built-in IR codes for all compatible Bluesound players, the RC1 works right out of the box with no setup or configuration required beyond inserting the included two CR2032 coin-cell batteries. Compatible with all Bluesound Gen 2 and Gen 2i players running BluOS 3.6.2 or later, the RC1 provides direct point-and-control access to volume, play/pause, track navigation, and up to 10 programmable music presets without requiring a smartphone, tablet, or the BluOS Controller app for everyday playback control. One RC1 can be used to control all Bluesound players in a home, or individual remotes can be dedicated to specific rooms.

Pre-Programmed IR Control With No Setup Required

All Bluesound Gen 2 and Gen 2i players have IR sensors built into their front panels with the RC1's IR codes embedded directly in the BluOS firmware. This means the RC1 operates any compatible Bluesound player the moment batteries are inserted, with no pairing, no app configuration, and no additional programming required for basic playback functions. Presets 1 through 10 can be configured in the BluOS Controller app and then recalled instantly from the RC1's dedicated preset buttons, giving quick one-touch access to favorite playlists, internet radio stations, or streaming service queues without unlocking a phone. The RC1 also works with select BluOS-enabled NAD amplifiers and players, extending its usefulness to multi-brand BluOS installations.

Key Features

• Works Out of the Box: IR codes for all compatible Bluesound Gen 2 and Gen 2i players are pre-loaded in the remote and embedded in BluOS firmware; no setup or app required for basic operation.
• 10 Programmable Presets: Dedicated preset buttons allow one-touch recall of up to 10 BluOS presets (playlists, stations, or inputs) configured in the BluOS Controller app.
• Dedicated Playback Controls: Streamlined button layout covers volume up/down, play/pause, previous/next track, and input selection for quick access to all core playback functions.
• Controls Multiple Players: A single RC1 can be used to control Bluesound players in different rooms by pointing it at each player's IR sensor, or individual remotes can be assigned to specific rooms.
• Compatible with Select NAD BluOS Players: In addition to Bluesound Gen 2 and Gen 2i products, the RC1 also works with select BluOS-enabled NAD amplifiers and streamers running compatible firmware.
• Powered by Included CR2032 Batteries: Two CR2032 3V lithium coin-cell batteries are included; the battery compartment is located on the rear panel and opens without tools.
• Ergonomic Handheld Design: Compact form factor with clearly labeled, logically grouped buttons for comfortable everyday use.

Technical Specifications

Frequently Asked Questions

What is the Bluesound RC1?

The Bluesound RC1 is an infrared remote control pre-programmed for all Bluesound Gen 2 and Gen 2i players running BluOS 3.6.2 or later. It requires no setup and works immediately upon battery installation, providing direct IR control of volume, playback, track navigation, and up to 10 programmable presets without needing the BluOS Controller app for everyday use. It is also compatible with select BluOS-enabled NAD amplifiers and players.

Do I need to configure anything before using the RC1?

No configuration is needed to use the RC1 for basic playback functions. Insert the included CR2032 batteries, point the remote at any compatible Bluesound player with its IR sensor visible, and begin controlling volume, play/pause, and track navigation immediately. Preset buttons 1 through 10 can optionally be configured in the BluOS Controller app at any time, but the remote functions fully for all other controls straight out of the box.

Can the RC1 control Bluesound players in different rooms?

Yes, a single RC1 can control Bluesound players in different rooms by pointing it at the IR sensor on the front panel of each player. Because the IR codes are embedded in BluOS across all compatible Gen 2 and Gen 2i players, the same remote works with every player in the home without any reprogramming. Alternatively, multiple RC1 remotes can be purchased to dedicate one to each room for independent control.

Is the RC1 compatible with newer Bluesound players like the Node (2024) and Node Nano?

The RC1 is confirmed compatible with Bluesound Gen 2 and Gen 2i players running BluOS 3.6.2 or later. Newer players including the Node (2024, N132) and Node Nano (N030) include an IR sensor with IR remote learning capability and are compatible with the RC1 provided they are running current BluOS firmware. Bluesound recommends confirming compatibility with the current firmware version for any newer player via bluesound.com or the BluOS support documentation.

Where can I buy the Bluesound RC1 in Buffalo, NY or Western New York?

The Bluesound RC1 Remote Control is available at Vinyl Sound, located in Buffalo, NY, serving the Western New York and greater Buffalo area. Vinyl Sound is an authorized Bluesound dealer with full US warranty support and hands-on expertise across the Bluesound ecosystem. Visit vinylsound.com or contact the Buffalo store directly for current availability.