Add to shopping cart is not available for our Dynaudio products.

Please call or email us to place your order.

Dynaudio Stand 20 Speaker Stand (Pair) at Vinyl Sound Buffalo, NY USA

The Stand 20 is a purpose-designed aluminium speaker stand from Dynaudio (Skanderborg, Denmark), available at Vinyl Sound in Buffalo, NY, USA. Engineered specifically for Dynaudio's large standmount loudspeakers, it is the matching stand for the Contour 20i, Evoke 20, Special Forty, and Focus 10. Standing at 599mm tall without spikes, it features a sand-fillable front column, rear cable management channel, tool-free top-adjustable spikes, non-stick rubber top plate pads, and rubber base rings for hard floors. The top plate accommodates up to 10 degrees of tilt without risk of the speaker toppling. Available in Black Satin, White Satin, and Silver Satin satin powder-coated finishes, sold as a pair.

Aluminium Construction, Sand Loading, and Acoustic Stability

The Stand 20 is cast and fabricated from aluminium throughout, providing a rigid, low-resonance structure that minimises energy transfer from the speaker cabinet to the floor. The column features a sand-fillable front compartment, supplied with a plastic bag to allow clean, spill-free filling. Sand loading significantly increases the stand's effective mass, lowering its resonant frequency well below the audio band and reducing the mechanical energy the speaker transmits into the listening room through the stand. The 316mm x 379mm base plate distributes the combined weight of stand, sand, and speaker across a stable footprint, and four rubber ring feet protect hard floors while providing a degree of vibration isolation between the base plate and the floor surface. The column profile and base plate geometry are designed to match the design language of Dynaudio's current speaker lines, with the Dynaudio logo integrated into the cast aluminium rather than applied as a separate badge, ensuring long-term appearance quality that is unaffected by wear or cleaning.

Practical Features: Cable Management, Top-Adjustable Spikes, and Non-Stick Top Plate

The rear face of the Stand 20's column includes a dedicated cable management channel with a large cutout at the top, allowing speaker cables, signal cables, and power cables to be routed through the interior of the stand from the speaker down to the floor without external cable dressing. This keeps the stand appearance clean and reduces cable pull on speaker binding posts. The floor spikes are adjustable from the top of the stand without tools, allowing levelling on uneven floors without having to tip the stand or remove the speaker. The 150mm x 210mm top plate is fitted with non-stick rubber pads that provide sufficient friction to keep a speaker securely in position even if the stand is tilted up to 10 degrees, while also providing a small degree of vibration decoupling between the speaker cabinet and the stand top plate. The combination of sand-loadable column, rubber base feet, and non-stick rubber top pads gives the Stand 20 mechanical isolation at both the floor interface and the speaker interface.

Key Features

• Matched to Dynaudio Standmounts: Designed specifically for the Contour 20i, Evoke 20, Special Forty, and Focus 10, with top plate dimensions and stand height calibrated to these speaker footprints and seated ear height requirements.
• Sand-Fillable Column: Front column sand compartment with included plastic filling bag, increasing stand mass and lowering resonant frequency for acoustically inert support.
• Aluminium Construction: Full aluminium cast and fabricated structure with structured satin powder coat finish in Black Satin, White Satin, or Silver Satin, with logo integrated into the casting for long-term appearance durability.
• Rear Cable Management: Internal cable channel running the full height of the column with a large cutout at the top for routing speaker, signal, and power cables through the stand interior.
• Tool-Free Top-Adjustable Spikes: Floor spikes adjustable from the top of the stand without tools or tipping, for easy levelling on uneven surfaces.
• Non-Stick Rubber Top Plate Pads: Pads on the 150mm x 210mm top plate prevent the speaker from sliding even when the stand is tilted up to 10 degrees, while providing light vibration isolation between speaker and stand.
• Rubber Base Rings: Four rubber ring feet on the base plate for hard floor placement, protecting floors and providing a degree of vibration isolation at the stand-floor interface.
• Sold as a Pair: Supplied as a complete pair with sand-filling bag included.

Technical Specifications

Frequently Asked Questions

What is the Dynaudio Stand 20?

The Dynaudio Stand 20 is a purpose-designed aluminium speaker stand matched to Dynaudio's large standmount loudspeakers, including the Contour 20i, Evoke 20, Special Forty, and Focus 10. It stands 599mm tall without spikes, features a sand-fillable column, rear cable management channel, tool-free top-adjustable spikes, non-stick rubber top plate pads, and rubber base feet. Available in Black Satin, White Satin, and Silver Satin finishes, and sold as a pair.

Which Dynaudio speakers is the Stand 20 designed for?

The Stand 20 is dimensioned and specified for Dynaudio's large standmount speaker range, specifically the Contour 20i, Evoke 20, Special Forty, and Focus 10. Its 150mm x 210mm top plate accommodates the footprint of these speakers, and its 599mm height positions the tweeter of each at approximately the correct seated ear height for typical listening chair heights. It can also be used with other Dynaudio standmounts and compatible third-party speakers whose footprint fits the top plate dimensions.

Should I fill the Dynaudio Stand 20 with sand?

Sand filling is strongly recommended for best acoustic performance. The increased mass from sand significantly lowers the stand's resonant frequency, reducing the amount of mechanical energy the speaker transmits into the stand and floor during operation. This produces tighter bass, a cleaner midrange, and improved imaging stability compared to the unfilled stand. A plastic bag is included to facilitate filling without spillage. The amount of sand used is a matter of preference, with more sand providing greater mass loading. Dry, fine-grained sand is typically recommended for consistent packing.

Can the Stand 20 be used on hardwood or tiled floors?

Yes. The Stand 20's base plate is fitted with rubber ring feet specifically for use on hard floors, providing both floor protection and a degree of vibration isolation. For users who prefer spike coupling to the floor through carpet, the floor spikes can be deployed instead. Both configurations are supported by the stand's adjustable spike design. When using spikes on hard floors, separate floor protection discs are available as accessories to prevent surface damage.

How does the cable management work on the Stand 20?

The rear face of the Stand 20 column has an internal cable channel running from the base to the top of the stand. A large cutout at the top allows cables to enter the channel from the speaker's binding posts or connection points. Speaker cables, signal cables, and power cables can all be routed down through the interior of the stand to the floor, keeping the external appearance clean and preventing cables from looping or hanging unsupported between the speaker and the floor.

Where can I buy the Dynaudio Stand 20 in Buffalo, NY or the USA?

The Dynaudio Stand 20 is available at Vinyl Sound in Buffalo, NY, USA. Vinyl Sound is an authorized Dynaudio dealer serving customers in Buffalo, Western New York, and across the United States. Contact Vinyl Sound Buffalo to purchase the Stand 20 alongside matching Dynaudio standmount speakers or as a standalone accessory purchase.