Add to shopping cart is not available for our Dynaudio products.

Please call or email us to place your order.

Dynaudio Evoke 30 Floorstanding Speaker at Vinyl Sound Buffalo, NY USA

The Evoke 30 is a 2.5-way compact floorstanding loudspeaker from Dynaudio (Skanderborg, Denmark), available at Vinyl Sound in Buffalo, NY, USA. Part of Dynaudio's Evoke series, it combines a 28mm Cerotar soft-dome tweeter with Hexis inner dome and twin 14cm MSP Esotec+ mid/bass drivers with 52mm aluminium voice coils in a rear-ported bass reflex cabinet. Sensitivity is 88 dB, rated impedance is 4 ohms, IEC power handling is 200W, and frequency response extends from 40 Hz to 23 kHz. At just 900mm tall and 180mm wide, the Evoke 30 delivers full-range floorstanding performance in a compact, furniture-grade format available in four finishes. The Evoke 30 received the AVForums Best Buy Award 2024.

Cerotar Tweeter with Hexis: Confidence Technology in the Evoke Series

The Evoke 30's Cerotar tweeter is a purpose-built 28mm soft-dome design that consolidates technologies from three of Dynaudio's most celebrated products. Its airflow management system is derived from the Esotar Forty anniversary tweeter; its precision-coated dome uses the same coating technique found in the Contour range; and its Hexis inner dome is inherited directly from the flagship Confidence series. The Hexis is a small, geometrically shaped secondary dome positioned immediately behind the tweeter diaphragm. It prevents unwanted resonant frequencies from forming in the cavity behind the playing surface and reflecting back through the dome, a mechanism that would otherwise introduce frequency response irregularities and listening fatigue at extended sessions. By suppressing this resonance path, the Cerotar produces smoother, more natural treble with greater detail resolution. The Ferrite+ ceramic magnet system driving the Cerotar uses strontium carbonate for maximum sensitivity, translating to an honest, transparent treble presentation across the speaker's full operating range. The 2.5-way crossover operates at 1,200 Hz and 2,300 Hz using second-order networks. The two 14cm MSP drivers cross to the tweeter at different points: the upper driver extends to 2,300 Hz while the lower driver rolls off at 1,200 Hz, creating an overlapping bass reinforcement band that increases low-frequency output and extends bass depth.

Esotec+ Mid/Bass Drivers: MSP Construction and Aluminium Voice Coils

Both 14cm Esotec+ mid/bass drivers in the Evoke 30 are built from Dynaudio's proprietary MSP (Magnesium Silicate Polymer) diaphragm material, a compound developed in-house and used continuously in Dynaudio drivers for over four decades. MSP provides an optimised balance of low mass, high stiffness, and effective self-damping, qualities that translate directly to controlled bass performance and clear, textured midrange reproduction. Each cone is formed from a single unbroken piece of MSP, maximising rigidity and minimising the physical deformation that multi-part cone constructions can introduce. The cones connect directly to glass-fibre voice-coil formers bonded under the Balance Ribs visible around the cone centre, ensuring efficient transfer of coil motion energy to the diaphragm. Both drivers use 52mm aluminium voice coils, chosen for the correct balance of winding height and mass to handle both bass and midrange frequencies within the 2.5-way configuration. Aramid-fibre spiders maintain driver centring under high excursion, and the Contour-derived surround provides a longer throw ratio for greater bass punch. The rear-firing bass reflex port includes a foam plug for near-wall placement adjustment, reducing bass loading without requiring amplifier or equalizer intervention.

Key Features

• Cerotar Tweeter with Hexis: Dynaudio's 28mm soft-dome tweeter drawing on Esotar Forty airflow systems, Contour precision coating, and Confidence Hexis inner dome technology, driven by a strontium carbonate Ferrite+ ceramic magnet for smooth, natural high-frequency performance.
• Twin 14cm MSP Esotec+ Mid/Bass Drivers: Two single-piece MSP cone drivers with 52mm aluminium voice coils, aramid-fibre spiders, and Contour-derived long-throw surrounds for precise, dynamic bass and midrange reproduction.
• 2.5-Way Overlapping Crossover Architecture: A second-order 2.5-way crossover at 1,200 Hz and 2,300 Hz, with the two MSP drivers crossing to the tweeter at different frequencies to increase bass reinforcement while maintaining a single coherent driver in the midrange band.
• Compact Floorstanding Format: At 900mm tall and 180mm wide, the Evoke 30 delivers full-range bass reflex floorstander performance in a cabinet proportioned for real living rooms, without the visual or physical mass of a full-size tower design.
• Rear-Firing Bass Reflex Port with Foam Plug: An adjustable rear port with a foam plug for near-wall or corner placement, allowing the Evoke 30's bass response to be tuned mechanically to suit room position without electronic adjustments.
• Single-Piece MSP Cone Construction: Each driver cone is formed from one continuous piece of MSP, providing uniform rigidity and a solid mechanical coupling to the glass-fibre voice-coil former for minimal cone deformation and consistent driver response.
• Four Furniture-Grade Finishes: Black High Gloss, White High Gloss, Walnut Wood, and Blonde Wood, built to Dynaudio's furniture-grade cabinet and finishing standards for real-home aesthetics.
• Evoke Multi-Channel Compatible: Pairs with the Evoke 25C centre channel, Evoke 10 surrounds, and Dynaudio Sub 3 or Sub 6 subwoofers for a full Evoke home cinema system with consistent voicing across all channels.

Technical Specifications

Awards and Critical Recognition

• AVForums Best Buy Award 2024

Frequently Asked Questions

What is the Dynaudio Evoke 30?

The Dynaudio Evoke 30 is a compact 2.5-way floorstanding loudspeaker built in Denmark, featuring a 28mm Cerotar tweeter with Hexis inner dome and twin 14cm MSP Esotec+ mid/bass drivers with 52mm aluminium voice coils. It uses a rear-ported bass reflex enclosure, a second-order 2.5-way crossover at 1,200 Hz and 2,300 Hz, 88 dB sensitivity, 4-ohm impedance, 200W IEC power handling, and a frequency response from 40 Hz to 23 kHz. It received the AVForums Best Buy Award 2024.

How does the Dynaudio Evoke 30 compare to the KEF Q550 or Polk Audio Reserve R500?

The Dynaudio Evoke 30, KEF Q550, and Polk Audio Reserve R500 are all compact 2.5-way floorstanders in the mid-market segment. The KEF Q550 uses KEF's coaxial Uni-Q driver array in a 2.5-way configuration, combining tweeter and mid/bass driver in a single unit for a distinctive point-source presentation. The Polk Reserve R500 uses Polk's proprietary Pinnacle Ring Radiator tweeter and StereoHeight driver array. The Evoke 30 differentiates itself through its Cerotar tweeter with Hexis from the Confidence range, single-piece MSP Esotec+ cones with 52mm aluminium voice coils, and Danish handcrafted construction with furniture-grade finishing. Buyers prioritising tonal accuracy, driver material quality, and cabinet craftsmanship will find the Evoke 30 a clear step above both alternatives.

What is a 2.5-way crossover and how is it used in the Evoke 30?

A 2.5-way crossover uses two bass drivers and a tweeter, but crosses them at different frequencies rather than running both identical routes to the tweeter. In the Evoke 30, the upper 14cm MSP driver operates continuously from bass through midrange up to its 2,300 Hz crossover to the Cerotar tweeter, while the lower 14cm MSP driver handles only the frequencies below 1,200 Hz as additional bass reinforcement. This overlapping arrangement gives the Evoke 30 more low-frequency output and deeper bass extension than a single-driver two-way design at this cabinet size, while keeping a single driver responsible for the midrange band to ensure coherent, uncoloured vocal and instrument reproduction.

What amplifier does the Dynaudio Evoke 30 work best with?

The Evoke 30 is rated at 4 ohms with 88 dB sensitivity and 200W IEC power handling, making it suited to a high-current integrated amplifier rather than a budget AV receiver. A minimum of 50W into 4 ohms provides adequate drive for small to medium rooms, with more power beneficial for larger spaces or higher listening levels. Integrated amplifiers from NAD, Cambridge Audio, Exposure, or Rega at the appropriate output level are all well-matched choices. Dynaudio's sensitivity ratings are noted for being conservatively stated, so the Evoke 30 may be slightly more efficient in practice than the specification suggests.

Can the Dynaudio Evoke 30 be placed close to a rear wall?

Yes, with adjustment. The Evoke 30 includes a rear port foam plug that can be fully or partially inserted to reduce bass loading when the speakers are placed near a rear wall. In fully open port configuration, a minimum of 20 to 50 cm clearance from the rear wall is recommended to avoid excessive bass build-up. With the foam plug partially or fully inserted, the speaker becomes more tolerant of near-wall placement and can still deliver a balanced, controlled bass response in tighter room positions.

Where can I buy the Dynaudio Evoke 30 in Buffalo, NY or the USA?

The Dynaudio Evoke 30 is available at Vinyl Sound in Buffalo, NY, USA. Vinyl Sound is an authorized Dynaudio dealer serving customers in Buffalo, Western New York, and across the United States. Contact Vinyl Sound Buffalo to arrange a listening demonstration or to discuss amplifier pairing and room setup options.

How does the Evoke 30 compare to the Evoke 50?

The Dynaudio Evoke 50 is the three-way flagship of the Evoke series, adding a dedicated 15cm MSP neodymium midrange driver between the Cerotar tweeter and the twin 18cm Esotec+ woofers, extending bass to 35 Hz and increasing IEC power handling to 260W. The Evoke 30 uses a 2.5-way configuration without a dedicated midrange driver, reaching 40 Hz with twin 14cm MSP drivers and 200W handling. The Evoke 50 is better suited to larger listening rooms and higher-output listening levels, while the Evoke 30 is optimised for compact to medium spaces where a slimmer 180mm cabinet width and lighter 15.5 kg weight are practical advantages without meaningful sacrifice in bass performance for the room size.