Add to shopping cart is not available for our Dynaudio products.

Please call or email us to place your order.

Dynaudio Stand 10 Speaker Stand (Pair) at Vinyl Sound Buffalo, NY USA

The Stand 10 is a purpose-designed aluminium speaker stand from Dynaudio (Skanderborg, Denmark), available at Vinyl Sound in Buffalo, NY, USA. Matched to Dynaudio's compact standmount loudspeakers including the Emit 10, Evoke 10, and Xeo 20, it stands at 593mm tall without spikes and features a sand-fillable front column, rear cable management channel, bottom-adjusted finger-nut spikes, non-stick rubber top plate pads, and rubber base rings for hard floors. The top plate accommodates up to 10 degrees of tilt without risk of the speaker toppling. Available in Black Satin and White Satin powder-coated finishes, sold as a pair.

Aluminium Construction, Sand Loading, and Compact Speaker Compatibility

The Stand 10 is cast and fabricated from aluminium throughout, providing a rigid, low-resonance structure that minimises mechanical energy transfer between the speaker cabinet and the floor. Its column includes a sand-fillable front compartment, supplied with a plastic bag for clean filling without spillage. Sand loading substantially increases the stand's effective mass, suppressing its resonant frequency below the audio band and reducing the vibration energy that the speaker transmits into the stand and listening room during operation. The result is tighter bass, cleaner midrange, and more stable imaging compared to an unfilled lightweight stand. The 273mm x 296mm base plate provides a stable footprint for compact speaker use, with four rubber ring feet on the underside for hard floor placement that protect the floor surface while providing a degree of vibration isolation at the stand-floor interface. The aluminium column profile and base plate geometry are matched to Dynaudio's current compact speaker design language, with the Dynaudio logo cast directly into the aluminium rather than applied as a separate adhesive badge, ensuring a long-lasting clean appearance. The Stand 10 is available in Black Satin and White Satin powder-coated finishes, two options compared to the three finishes available on the larger Stand 20.

Cable Management, Bottom-Adjusted Spikes, and Non-Stick Top Plate

The rear face of the Stand 10 column includes an internal cable management channel running from the base to the top, with a large cutout at the top entry point for routing speaker cables, signal cables, and power cables through the interior of the stand. This keeps external cable runs concealed and prevents cables from hanging unsupported between the speaker and the floor. The floor spikes are inserted from the bottom of the base plate and adjusted via a large finger nut that can be turned by hand without tools, providing levelling adjustment on uneven floors by screwing the spike in or out. The 150mm x 180mm top plate is fitted with non-stick rubber pads that provide sufficient friction to hold a speaker securely in position even if the stand is tilted up to 10 degrees, while also providing a light degree of vibration decoupling between the speaker cabinet bottom and the stand top plate. The Stand 10 shares the same fundamental practical architecture as the larger Stand 20, with the key differences being the smaller base plate, bottom-adjusted rather than top-adjusted spikes, and two rather than three available finishes.

Key Features

• Matched to Dynaudio Compact Standmounts: Designed for the Emit 10, Evoke 10, and Xeo 20, with 150mm x 180mm top plate dimensions and 593mm stand height calibrated to these speaker footprints and seated ear height requirements.
• Sand-Fillable Column: Front column sand compartment with included plastic filling bag, increasing stand mass and lowering resonant frequency for acoustically inert support.
• Aluminium Construction: Full aluminium cast and fabricated structure with structured satin powder coat in Black Satin or White Satin, with logo integrated into the casting for long-term appearance durability.
• Rear Cable Management: Internal cable channel with large top entry cutout for routing speaker, signal, and power cables through the stand interior, keeping external cable runs concealed.
• Bottom-Adjusted Finger-Nut Spikes: Floor spikes adjustable by hand from the underside of the base plate via a large finger nut, providing levelling on uneven floors without tools.
• Non-Stick Rubber Top Plate Pads: Pads on the 150mm x 180mm top plate prevent the speaker from sliding even when the stand is tilted up to 10 degrees, while providing light vibration decoupling between speaker and stand.
• Rubber Base Rings: Four rubber ring feet on the base plate for hard floor placement, protecting floors and providing vibration isolation at the stand-floor interface.
• Sold as a Pair: Supplied as a complete pair with sand-filling bag included.

Technical Specifications

Frequently Asked Questions

What is the Dynaudio Stand 10?

The Dynaudio Stand 10 is a purpose-designed aluminium speaker stand for Dynaudio's compact standmount loudspeakers, including the Emit 10, Evoke 10, and Xeo 20. It stands 593mm tall without spikes, features a sand-fillable front column, rear cable management channel, bottom-adjusted finger-nut spikes, non-stick rubber top plate pads, and rubber base ring feet. Available in Black Satin and White Satin finishes and sold as a pair.

What is the difference between the Dynaudio Stand 10 and Stand 20?

The Stand 20 is designed for Dynaudio's larger standmount speakers, including the Contour 20i, Evoke 20, and Special Forty, with a larger 150mm x 210mm top plate, larger 316mm x 379mm base plate, and three available finishes including Silver Satin alongside Black and White. Its spikes are top-adjusted without tools from above. The Stand 10 is designed for compact Dynaudio standmounts including the Emit 10 and Evoke 10, with a smaller 150mm x 180mm top plate, smaller 273mm x 296mm base plate, and two finishes. Its spikes are bottom-adjusted via finger nut. Both share sand-loadable columns, rear cable management, non-stick rubber top plate pads, and rubber base ring feet. The Stand 10 is 6mm shorter than the Stand 20 at 593mm versus 599mm.

Should I fill the Dynaudio Stand 10 with sand?

Sand filling is strongly recommended for best acoustic performance. Increased mass from sand lowers the stand's resonant frequency, reducing mechanical energy transfer from the speaker into the stand and floor. This produces tighter bass, cleaner midrange, and more stable imaging compared to the unfilled stand. A plastic bag is included to allow filling without spillage. Dry, fine-grained sand provides consistent packing. The amount of sand can be adjusted to preference, with more sand providing greater mass loading.

Can the Stand 10 be used with non-Dynaudio speakers?

Yes, the Stand 10 can be used with any compact standmount speaker whose base footprint fits within the 150mm x 180mm top plate dimensions and whose weight falls within the stand's capacity. The non-stick rubber pads on the top plate provide grip for speakers up to approximately 15 kg per speaker in typical placement, and the finger-nut spikes allow levelling adjustment for any speaker placed on the stand. It is particularly suited to compact standmounts with a footprint similar to the Dynaudio Emit 10 and Evoke 10.

How do I adjust the Stand 10's floor spikes?

The Stand 10's spikes are inserted from the bottom of the base plate and adjusted by hand via a large finger nut underneath the base. To raise a spike, turn the finger nut in one direction to extend it; to lower it, turn in the opposite direction. This allows levelling on uneven floors without tools. When adjustment is complete, ensure all four spikes are making firm contact with the floor for maximum stability. On hard floors, the rubber ring feet can be used as an alternative to spikes to protect the floor surface.

Where can I buy the Dynaudio Stand 10 in Buffalo, NY or the USA?

The Dynaudio Stand 10 is available at Vinyl Sound in Buffalo, NY, USA. Vinyl Sound is an authorized Dynaudio dealer serving customers in Buffalo, Western New York, and across the United States. Contact Vinyl Sound Buffalo to purchase the Stand 10 alongside matching compact Dynaudio standmount speakers or as a standalone accessory.