EverSolo DMP-A6 Gen 2 Streaming DAC at Vinyl Sound Buffalo, NY USA

The DMP-A6 Gen 2 is a high-resolution streaming DAC and preamplifier from EverSolo (Shenzhen, China), available at Vinyl Sound in Buffalo, NY, USA. Building on the acclaimed original DMP-A6, the Gen 2 adds an ultra-low-noise linear power supply with noise below 40 µV, HDMI ARC input, 12V trigger output, and Wake-on-LAN to a platform centered on dual ESS ES9038Q2M DAC chips, the XMOS XU316 audio processor, and a fully balanced circuit with XLR and RCA outputs. It supports PCM up to 32-bit/768 kHz, native DSD512, and full MQA decoding, and is Roon Ready with native apps for Tidal, Qobuz, Amazon Music, and more. The DMP-A6 Gen 2 is available to audiophiles across Western New York at Vinyl Sound, an authorized EverSolo dealer in Buffalo.

Dual ES9038Q2M DACs, Linear Power Supply, and Fully Balanced Circuit

The DMP-A6 Gen 2 uses two ESS ES9038Q2M DAC chips in a fully balanced dual configuration, each independently handling one audio channel from decoding through to the analog output. The OPA1642 output op-amp provides low-noise, transparent signal amplification through the balanced output stage. The key Gen 2 upgrade over the original DMP-A6 is the introduction of a linear power supply that reduces noise to below 40 µV, providing a purer and more stable power source for the audio circuits compared to the switching supply of the first generation. The fully balanced circuit runs from the DAC stage through to the XLR output, delivering lower crosstalk, reduced distortion, and greater dynamic range than a single-ended topology. Two DOH chips support HDMI DSD native multichannel output and D2P 5.1 passthrough. The XMOS XU316 third-generation 16-core audio processor handles DSD512 Native and PCM 768 kHz / 32-bit decoding via USB, with full MQA support. The EOS (EverSolo Original Sampling-Rate) audio engine bypasses Android's system sample rate conversion to preserve native file resolution throughout the signal path.

Streaming, Gen 2 Connectivity Additions, and Local Playback

The DMP-A6 Gen 2 supports native streaming from Tidal, Qobuz, Amazon Music, Apple Music, Deezer, and Spotify via the 6-inch LCD touchscreen and EverSolo Smart Control app. Roon Ready certification, Tidal Connect, Spotify Connect, AirPlay, DLNA, and UPnP cover all major network audio protocols. The Gen 2 revision adds HDMI ARC input for receiving TV audio through the DMP-A6's DAC stage, a 12V DC trigger output for automated power sequencing, and Wake-on-LAN for remote power-on via the app over a wired network connection. Bluetooth 5.0 via the Qualcomm QCC5125 module supports SBC, AAC, aptX, aptX LL, aptX HD, and LDAC. A single M.2 NVMe SSD slot (up to 4 TB, sold separately) enables onboard local music library storage via the EverSolo Music Library. A 10-band parametric EQ, VU meter display, and six selectable digital filter profiles are included.

Key Features

• Dual ES9038Q2M DACs in Fully Balanced Configuration: Two ESS Sabre chips in independent left/right channel configuration for reduced crosstalk and improved dynamic range.
• Ultra-Low-Noise Linear Power Supply (<40 µV): Gen 2 upgrade over the original DMP-A6's switching supply, providing cleaner power to the analog audio circuits.
• XMOS XU316 Audio Processor: Third-generation 16-core processor for DSD512 Native and PCM 768 kHz / 32-bit decoding with full MQA support.
• Roon Ready and Multi-Service Streaming: Native apps for Tidal, Qobuz, Amazon Music, Apple Music, Deezer, and Spotify; Roon Ready, Tidal Connect, Spotify Connect, AirPlay, and DLNA.
• HDMI ARC Input (Gen 2 Addition): Accepts TV audio for processing through the DMP-A6 Gen 2's DAC stage.
• 12V Trigger Output (Gen 2 Addition): Automated power sequencing with compatible amplifiers.
• Wake-on-LAN (Gen 2 Addition): Remote power-on via the EverSolo app over a wired network connection.
• M.2 NVMe SSD Slot: Up to 4 TB local music storage (sold separately) with EverSolo Music Library management.
• Bluetooth 5.0 with LDAC: Qualcomm QCC5125 module for wireless input with SBC, AAC, aptX, aptX LL, aptX HD, and LDAC.
• HDMI Multichannel Output: DSD Native and up to 5.1 channel D2P multichannel output via HDMI.

Technical Specifications

Frequently Asked Questions

What is the EverSolo DMP-A6 Gen 2?

The EverSolo DMP-A6 Gen 2 is a streaming DAC and preamplifier combining dual ES9038Q2M DAC chips in a fully balanced circuit with an ultra-low-noise linear power supply, the XMOS XU316 audio processor, and a 6-inch LCD touchscreen. It is Roon Ready and supports Tidal, Qobuz, Amazon Music, Apple Music, Deezer, and Spotify natively, with PCM up to 32-bit/768 kHz, native DSD512, and full MQA decoding. The Gen 2 adds HDMI ARC input, 12V trigger output, and Wake-on-LAN over the original DMP-A6.

What is the difference between the DMP-A6 Gen 2 and the DMP-A6 Gen 2 Master Edition?

The Master Edition upgrades three key components over the standard Gen 2: the clock system is replaced with Accusilicon femtosecond oscillators for lower phase noise and jitter, the output op-amp is upgraded from OPA1642 to OPA1612 for lower distortion (THD 0.000015% at 1 kHz), and the XLR output level is raised from the standard Gen 2's level to 5.2 V with dynamic range increasing to 128 dB XLR. The Master Edition also adds an aerospace-grade full-aluminum chassis with a matte texture and an RGB gradient LED volume knob. For listeners prioritizing the most refined analog output quality, the Master Edition is the recommended choice; the standard Gen 2 offers the same streaming platform, connectivity, and DAC chip complement at a lower investment.

Is the EverSolo DMP-A6 Gen 2 Roon Ready?

The DMP-A6 Gen 2 is fully Roon Ready certified, functioning as a native Roon endpoint with full metadata, volume, and DSP support from a Roon Core. It also supports Tidal Connect and Spotify Connect for direct streaming from those apps without a Roon subscription. The native EverSolo streaming software covers Tidal, Qobuz, Amazon Music, Apple Music, Deezer, Spotify, and a broad range of third-party apps via direct install.

Can the DMP-A6 Gen 2 receive TV audio via HDMI ARC?

The Gen 2 adds an HDMI ARC input that was absent from the original DMP-A6, allowing the unit to receive audio from a television's ARC or eARC output for processing through the ES9038Q2M DAC stage and output via XLR or RCA. This enables the DMP-A6 Gen 2 to serve as the audio hub for both a two-channel hi-fi system and a television in the same room, routing all audio sources through a single set of speakers and amplifier.

What amplifiers pair well with the EverSolo DMP-A6 Gen 2 in Buffalo?

The DMP-A6 Gen 2's balanced XLR output connects directly to power amplifiers or integrated amplifiers with balanced inputs. At Vinyl Sound in Buffalo, natural partners include the EverSolo AMP-F2, which was physically dimensioned to pair with the DMP-A6 chassis, as well as NAD and Audiolab integrated amplifiers. The 12V trigger output enables automatic power-on/standby sequencing with compatible amplifiers, creating a seamless system that powers on and off from a single button press.

Where can I buy the EverSolo DMP-A6 Gen 2 in Buffalo, NY?

The EverSolo DMP-A6 Gen 2 is available at Vinyl Sound, an authorized EverSolo dealer in Buffalo, New York, serving audiophiles across Western New York. Vinyl Sound carries the full EverSolo lineup including both the standard Gen 2 and the Master Edition, and provides system-matching guidance for pairing with amplifiers and speakers. Purchasing from an authorized dealer ensures full factory warranty coverage and product support.