{"product_id":"kanto-s6-angled-desktop-speaker-stands-for-large-speakers-pair","title":"Kanto S6 Angled Desktop Speaker Stands for Large Speakers (Pair)","description":"\u003ch2\u003eKanto S6 Angled Desktop Speaker Stands for Large Speakers (Pair)\u003c\/h2\u003e\n\u003cp\u003eThe Kanto S6 is a pair of angled desktop speaker stands built for 4- to 7-inch bookshelf and powered speakers. A 16-degree upward tilt directs high frequencies toward your ears, closed-cell foam isolation on the top and bottom minimises vibration transfer, and 5 mm solid steel construction supports up to 20 lbs (approximately 9 kg) per stand. Compatible with Kanto models including the YU6 and TUK, the S6 is the practical desktop placement solution for audiophiles and home studio users alike. Available now at Vinyl Sound.\u003c\/p\u003e\n\n\u003ch3\u003e16-degree angled design for optimized listening\u003c\/h3\u003e\n\u003cp\u003eSpeaker positioning is one of the most overlooked factors in desktop audio. When speakers sit flat on a desk, tweeters typically fire below ear level, so listeners miss high-frequency detail and imaging accuracy. The S6 solves this with a built-in 16-degree upward tilt that redirects the tweeter axis toward your ears, chosen to work at typical seated distances of 60 to 90 cm. It restores soundstage depth and treble clarity without riser blocks, books, or improvised wedges, for a more focused and balanced presentation across the full frequency range.\u003c\/p\u003e\n\n\u003ch3\u003eVibration isolation and structural rigidity\u003c\/h3\u003e\n\u003cp\u003eResonance transfer from speaker cabinets to desk surfaces is a common cause of coloration and bass muddiness. The S6 addresses this with closed-cell foam padding bonded to both the top contact surface and the bottom feet. This dual-layer isolation decouples the speaker from the desk, reducing mechanical feedback and keeping bass clean and defined even at higher volumes. The 5 mm solid steel frame provides the rigidity needed to prevent micro-vibrations from affecting the cabinet during dynamic transients.\u003c\/p\u003e\n\n\u003ch3\u003eSecure 1\/4-20 mounting\u003c\/h3\u003e\n\u003cp\u003eA standard 1\/4-20 threaded screw and mounting hole let compatible speakers such as the Kanto YU6 and Kanto TUK be securely fastened to prevent tipping or movement. The open, angular frame uses minimal material for a clean, modern look that keeps your desk surface visible alongside any speaker finish.\u003c\/p\u003e\n\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctr\u003e\n\u003ctd\u003eModel\u003c\/td\u003e\n\u003ctd\u003eKanto S6\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eType\u003c\/td\u003e\n\u003ctd\u003eAngled desktop speaker stands\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible speaker size\u003c\/td\u003e\n\u003ctd\u003e4-inch to 7-inch speakers\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTilt angle\u003c\/td\u003e\n\u003ctd\u003e16 degrees upward\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight capacity (per stand)\u003c\/td\u003e\n\u003ctd\u003e20 lbs (approx. 9 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003e5 mm solid steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVibration isolation\u003c\/td\u003e\n\u003ctd\u003eClosed-cell foam (top and bottom)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting hardware\u003c\/td\u003e\n\u003ctd\u003e1\/4-20 screw included\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eQuantity\u003c\/td\u003e\n\u003ctd\u003ePair (2 stands)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand origin\u003c\/td\u003e\n\u003ctd\u003eKanto, Vancouver, Canada\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCompatible models (examples)\u003c\/td\u003e\n\u003ctd\u003eKanto YU6, Kanto TUK, and other 4-7 inch speakers with 1\/4-20 mount\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIn the box\u003c\/td\u003e\n\u003ctd\u003e2 stands, 2 x 1\/4-20 mounting screws, pre-applied foam pads\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\n\n\u003ch3\u003eFrequently asked questions\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eWhat is the Kanto S6?\u003c\/strong\u003e\u003cbr\u003e\nThe Kanto S6 is a pair of angled desktop speaker stands built for 4- to 7-inch speakers. Each stand tilts 16 degrees, is made from 5 mm solid steel, supports up to 20 lbs, and includes closed-cell foam isolation pads plus a 1\/4-20 mounting screw to improve desktop listening ergonomics and reduce vibration transfer.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhat is the difference between the Kanto S6 and the Kanto S4?\u003c\/strong\u003e\u003cbr\u003e\nThe S6 is sized for larger 4- to 7-inch speakers with a 20 lb per-stand capacity and adds a threaded 1\/4-20 mount that locks the speaker to the stand. The Kanto S4 is intended for smaller 3- to 5-inch speakers such as the YU4 or YU2. Both share the same 16-degree tilt and steel construction.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eCan the Kanto S6 be used with speakers other than Kanto models?\u003c\/strong\u003e\u003cbr\u003e\nYes. The S6 works with any speaker in the 4- to 7-inch size range within the 20 lb per-stand limit. The 1\/4-20 mounting screw is a universal audio standard found on many powered monitors and bookshelf speakers. If your speaker has no 1\/4-20 insert, the stands still work as angled risers, with the foam pads providing grip and isolation.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs the Kanto S6 compatible with the Kanto YU6 and TUK speakers?\u003c\/strong\u003e\u003cbr\u003e\nYes. The S6 is explicitly compatible with the Kanto YU6 powered bookshelf speakers and the Kanto TUK powered speakers. Both have a 1\/4-20 threaded insert on their base that aligns with the included mounting screw, locking the speaker securely to the stand to prevent forward tipping or lateral movement.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eDo the Kanto S6 stands reduce vibration and desk resonance?\u003c\/strong\u003e\u003cbr\u003e\nYes. Closed-cell foam pads on both the top and bottom decouple the speaker from the desk. Closed-cell foam is denser and more effective at blocking vibration than open-cell alternatives, and its dual-side placement breaks the mechanical coupling at two points at once for tighter bass, reduced coloration, and a quieter desk during high-volume listening.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eIs the Kanto S6 sold as a pair?\u003c\/strong\u003e\u003cbr\u003e\nYes. The S6 ships as a matched pair, with two stands per box, so both the left and right speakers get the same tilt angle and vibration isolation for symmetrical stereo imaging.\u003c\/p\u003e\n\n\u003cp\u003e\u003cstrong\u003eWhere can I buy the Kanto S6 in the USA?\u003c\/strong\u003e\u003cbr\u003e\nThe Kanto S6 desktop speaker stands are available at Vinyl Sound with shipping across the USA. Vinyl Sound carries the full Kanto lineup, including stands, powered speakers, and audio accessories.\u003c\/p\u003e\n\n\u003cp\u003eOrder the Kanto S6 online at Vinyl Sound with shipping across the USA, or explore more \u003ca href=\"https:\/\/vinylsound.com\/collections\/kanto\"\u003eKanto\u003c\/a\u003e, \u003ca href=\"https:\/\/vinylsound.com\/collections\/speaker-stands\"\u003espeaker stands\u003c\/a\u003e, and \u003ca href=\"https:\/\/vinylsound.com\/collections\/speakers\"\u003epowered speakers\u003c\/a\u003e.\u003c\/p\u003e","brand":"Kanto","offers":[{"title":"Black","offer_id":54061456916787,"sku":null,"price":59.99,"currency_code":"USD","in_stock":true},{"title":"White","offer_id":54061456949555,"sku":null,"price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0873\/0293\/0739\/files\/KantoS6AngledDesktopSpeakerStandsforLargeSpeakers_Pair_1_1600x_6d0dc745-0463-4338-a8a2-1b46ddc441d0.webp?v=1789118843","url":"https:\/\/vinylsound.com\/products\/kanto-s6-angled-desktop-speaker-stands-for-large-speakers-pair","provider":"Vinyl Sound USA","version":"1.0","type":"link"}