{"product_id":"matrix-audio-ma-1-power-amplifier","title":"Matrix Audio MA-1 Power Amplifier","description":"\u003ch1\u003eMatrix Audio MA-1 Power Amplifier at Vinyl Sound Buffalo, NY\u003c\/h1\u003e\n\n\u003cp\u003eThe MA-1 is a flagship Class AB stereo power amplifier from Matrix Audio (Xi'an, China), available at Vinyl Sound in Buffalo, New York. Matrix Audio's first dedicated power amplifier, the MA-1 delivers \u003cstrong\u003e250W RMS per channel into 8 ohms and 450W RMS per channel into 4 ohms\u003c\/strong\u003e in Stereo mode, scaling to \u003cstrong\u003e900W into 4 ohms in bridged Mono mode\u003c\/strong\u003e. Its output stage uses ten ONSEMI high-power transistors per channel in a parallel push-pull configuration operating at high bias current, backed by a colossal dual-mono power supply with two independent 1250VA transformers and a 190,000µF capacitor bank. The MA-1 is configurable for Stereo, bridged Mono, or dual Mono operation, offering three distinct amplifier personalities in a single chassis. It has been reviewed by Positive Feedback alongside the Matrix Audio MP-1 preamplifier as part of the M Series flagship system, which also includes the MS-1 and MS-1c music streamers.\u003c\/p\u003e\n\n\u003ch2\u003eOutput Stage: Ten ONSEMI Transistors Per Channel in Push-Pull\u003c\/h2\u003e\n\u003cp\u003eThe MA-1's output stage deploys ten ONSEMI high-power transistors per channel arranged in a parallel push-pull configuration and operated at high bias current. Applying ten devices in parallel dramatically lowers the effective output impedance, contributing to the MA-1's measured damping factor of 350 at 8 ohms and 1kHz. A high damping factor means the amplifier exerts precise control over speaker cone movement, translating directly into tighter bass definition and faster transient response. The high-bias operating point pushes the output stage into a region that minimizes crossover distortion artifacts, preserving the textural detail of the music across all dynamic levels. Gain is selectable between +24dB and +30dB, allowing the MA-1 to be matched accurately to preamplifiers of different output levels without compromising the gain structure of the system.\u003c\/p\u003e\n\n\u003ch2\u003eDual-Mono 1250VA Power Supply and 190,000µF Capacitor Bank\u003c\/h2\u003e\n\u003cp\u003eThe MA-1's power supply is built around two independent oversized transformers, each dedicated to one channel, providing a combined 1250VA of total capacity. Square copper wire windings on each transformer deliver lower resistance and higher current capacity than conventional round wire, improving the amplifier's transient response and low-frequency authority. The transformer outputs feed a capacitor bank totaling 190,000µF, composed of 14 parallel-connected 6,800µF capacitors per channel. Distributing the capacitance across multiple smaller capacitors in parallel reduces the equivalent series resistance (ESR) compared to a single large capacitor of equivalent value, enabling the amplifier to respond instantaneously to large current demands at musical peaks without voltage sag or dynamic compression. The main supply rail operates at ±80V, and the total static power consumption at idle reaches 250-350W, reflecting the high-bias state of the output stage.\u003c\/p\u003e\n\n\u003ch2\u003eThree Operating Modes: Stereo, Mono, and Bridged\u003c\/h2\u003e\n\u003cp\u003eThe MA-1 operates in three distinct configurations. In Stereo mode it functions as a conventional two-channel amplifier delivering 250W into 8 ohms and 450W into 4 ohms per channel, suitable for the full range of passive loudspeakers down to 2 ohms. In dual Mono mode, two MA-1 units each handle a single channel independently, providing the ultimate in channel separation, a reduced noise floor per channel, and a dedicated power supply for each loudspeaker, an arrangement well suited to high-sensitivity single-wire speakers or bi-wired systems. In bridged Mono mode, two MA-1 units combine their output stages to deliver 500W into 8 ohms or 900W into 4 ohms from a single bridged output, addressing loudspeakers with demanding power requirements. All three modes are accommodated by the MA-1's adjustable gain, with the input sensitivity dropping from 1.48Vrms in Stereo and Mono to 1.0Vrms in Bridged mode.\u003c\/p\u003e\n\n\u003ch2\u003eH-Shaped Chassis and Intelligent Thermal Management\u003c\/h2\u003e\n\u003cp\u003eThe MA-1 uses the same H-shaped chassis architecture as the MP-1 preamplifier, machined from a 20mm thick CNC-aluminum central beam that forms the structural and mechanical core of the amplifier. All components including the power supply boards, audio circuit modules, and output devices are mounted to this central beam, creating isolated internal cavities that prevent electromagnetic coupling between sections. The left and right channel circuits are arranged symmetrically on either side of the beam, minimizing interference between channels and contributing to the measured -125dB crosstalk figure. Thermal management is handled by two temperature sensors that continuously monitor the main heatsink. When a preset threshold is exceeded, a 7.4-inch fan activates inside an isolated duct that keeps airflow away from electronic components, preventing dust accumulation and maintaining near-silent operation during normal listening levels. At 42.4kg and 430 x 518 x 201mm, the MA-1 is a physically imposing component built to the same rack width as the MP-1 and MS-1 for a coherent M Series installation.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e250W Per Channel into 8 Ohms (Stereo):\u003c\/strong\u003e Ten ONSEMI transistors per channel in parallel push-pull at high bias current deliver 250W into 8 ohms, 450W into 4 ohms, and full stability down to 2-ohm loads in Stereo and Mono modes.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e900W Bridged Mono into 4 Ohms:\u003c\/strong\u003e Two MA-1 units operate in bridged Mono mode to deliver up to 900W into 4 ohms, providing reference-level power for the most demanding loudspeakers.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eThree Configurable Operating Modes:\u003c\/strong\u003e Stereo, dual Mono, and bridged Mono modes offer three distinct amplifier configurations from a single chassis, adaptable to any system topology or loudspeaker requirement.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual-Mono 1250VA Power Supply:\u003c\/strong\u003e Two independent square copper wire toroidal transformers, one per channel, provide a combined 1250VA of power with separate windings ensuring complete channel isolation.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e190,000µF Capacitor Bank:\u003c\/strong\u003e 14 parallel-connected 6,800µF capacitors per channel form a low-ESR energy reservoir that responds instantaneously to dynamic current demands without compression.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDamping Factor of 350 at 8 Ohms:\u003c\/strong\u003e The low output impedance resulting from ten parallel output transistors gives the MA-1 precise control over speaker drivers, delivering tight bass and fast transients.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSelectable Gain (+24dB \/ +30dB):\u003c\/strong\u003e Two gain settings allow accurate level matching with any preamplifier output, preserving optimal gain structure across the full system.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eIntelligent Silent Cooling:\u003c\/strong\u003e Two heatsink temperature sensors trigger a 7.4-inch fan housed in an isolated duct when a thermal threshold is reached, keeping the fan out of the component airflow path and virtually inaudible during normal listening.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eH-Shaped CNC Chassis:\u003c\/strong\u003e A 20mm thick central aluminum beam provides mechanically isolated internal cavities for each circuit module, with the left and right channels arranged symmetrically for minimum inter-channel interference.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eTrigger In \/ Out:\u003c\/strong\u003e DC trigger ports enable system-wide power sequencing when integrated with the Matrix Audio MP-1 preamplifier and MS-1 or MS-1c music streamers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eClass AB Stereo Power Amplifier\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutput Stage\u003c\/td\u003e\n\u003ctd\u003e10x ONSEMI high-power transistors per channel, parallel push-pull\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStereo \/ Mono Power (8 ohm)\u003c\/td\u003e\n\u003ctd\u003e2x 250W RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStereo \/ Mono Power (4 ohm)\u003c\/td\u003e\n\u003ctd\u003e2x 450W RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBridged Mono Power (8 ohm)\u003c\/td\u003e\n\u003ctd\u003e1x 500W RMS\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBridged Mono Power (4 ohm)\u003c\/td\u003e\n\u003ctd\u003e1x 900W RMS (music signal)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOperating Modes\u003c\/td\u003e\n\u003ctd\u003eStereo, Dual Mono, Bridged Mono\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eXLR Input Impedance\u003c\/td\u003e\n\u003ctd\u003e40k ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRCA Input Impedance\u003c\/td\u003e\n\u003ctd\u003e20k ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput Sensitivity (Stereo \/ Mono)\u003c\/td\u003e\n\u003ctd\u003e1.48Vrms\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInput Sensitivity (Bridged)\u003c\/td\u003e\n\u003ctd\u003e1.0Vrms\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eGain\u003c\/td\u003e\n\u003ctd\u003e+24dB \/ +30dB (selectable)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e20Hz - 20kHz (+0, -0.15dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSNR\u003c\/td\u003e\n\u003ctd\u003e119dB at +24dB gain, 123dB at +30dB gain (A-weighted)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTHD+N\u003c\/td\u003e\n\u003ctd\u003eLess than 0.02% at 250W into 8 ohms (Stereo \/ Mono)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCrosstalk\u003c\/td\u003e\n\u003ctd\u003e-125dB\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDamping Factor\u003c\/td\u003e\n\u003ctd\u003e350 at 8 ohms, 1kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSpeaker Impedance (Stereo \/ Mono)\u003c\/td\u003e\n\u003ctd\u003e2-16 ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSpeaker Impedance (Bridged)\u003c\/td\u003e\n\u003ctd\u003e4-16 ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003e2x independent 1250VA square copper wire toroidal transformers (dual-mono)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCapacitor Bank\u003c\/td\u003e\n\u003ctd\u003e190,000µF total (14x 6,800µF per channel in parallel)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 100V-120V, 50\/60Hz (factory fixed)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eLess than 1W standby, 250-350W idle, less than 1250W maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTrigger In\u003c\/td\u003e\n\u003ctd\u003eDC 6-12V, less than 10mA\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eTrigger Out\u003c\/td\u003e\n\u003ctd\u003eDC 12V \/ 50mA max\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions\u003c\/td\u003e\n\u003ctd\u003e430 x 518 x 201mm (W x D x H)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e42.4kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eIncluded Accessories\u003c\/td\u003e\n\u003ctd\u003ePower cable, trigger cable, printed materials\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eConnections at a Glance\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003eXLR Balanced Analog Input (per channel)\u003c\/li\u003e\n  \u003cli\u003eRCA Single-Ended Analog Input (per channel)\u003c\/li\u003e\n  \u003cli\u003eSpeaker Binding Posts (per channel)\u003c\/li\u003e\n  \u003cli\u003eTrigger In (DC 6-12V)\u003c\/li\u003e\n  \u003cli\u003eTrigger Out (DC 12V \/ 50mA)\u003c\/li\u003e\n  \u003cli\u003eIEC Power Input\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is the Matrix Audio MA-1?\u003c\/h3\u003e\n\u003cp\u003eThe Matrix Audio MA-1 is a flagship Class AB stereo power amplifier from Matrix Audio, built around ten ONSEMI transistors per channel in parallel push-pull, a dual-mono 1250VA power supply, and a 190,000µF capacitor bank. It delivers 250W per channel into 8 ohms in Stereo mode, scaling to 900W into 4 ohms in bridged Mono mode, with selectable +24dB and +30dB gain and a measured damping factor of 350 at 8 ohms. It is available at Vinyl Sound in Buffalo, New York, and forms the power amplification anchor of the Matrix Audio M Series alongside the MP-1 preamplifier and MS-1 or MS-1c streamers.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Matrix Audio MA-1 compare to the Pass Labs XA60.8 or Parasound JC 5?\u003c\/h3\u003e\n\u003cp\u003eThe Matrix Audio MA-1 competes directly with high-power stereo amplifiers such as the Pass Labs XA60.8 and Parasound JC 5. The Pass Labs XA60.8 operates in pure Class A up to 60W before transitioning to Class AB, prioritizing tonal purity at lower output levels. The Parasound JC 5 is a fully balanced Class AB design delivering 400W into 4 ohms. The MA-1 differentiates with its ten-transistor-per-channel parallel output stage, true dual-mono 1250VA power supply with independent transformers per channel, three configurable operating modes including bridged Mono at 900W into 4 ohms, and the integrated trigger and gain-switching system designed for seamless M Series operation.\u003c\/p\u003e\n\n\u003ch3\u003eCan two Matrix Audio MA-1 amplifiers be used in bridged Mono mode for a mono configuration?\u003c\/h3\u003e\n\u003cp\u003eYes. Two MA-1 units operating in bridged Mono mode each deliver a single channel at up to 500W into 8 ohms or 900W into 4 ohms. In this configuration each amplifier handles one loudspeaker with the full combined output of both internal channels, making it appropriate for power-hungry loudspeakers or large listening rooms where extreme output power and authority are required. The minimum speaker impedance in bridged Mono mode is 4 ohms.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the dual Mono mode on the MA-1 and how does it differ from Stereo mode?\u003c\/h3\u003e\n\u003cp\u003eIn dual Mono mode, two MA-1 amplifiers are used with one unit dedicated entirely to the left channel and the other to the right channel. Each amplifier operates as a single-channel device with its complete power supply, output stage, and chassis resources devoted to one loudspeaker. This eliminates any shared power supply interaction between channels and reduces the noise floor per channel compared to standard Stereo mode. Dual Mono mode is well suited to loudspeakers that support bi-wiring or bi-amping, and to audiophiles seeking the maximum possible channel separation and dynamic headroom in a reference system.\u003c\/p\u003e\n\n\u003ch3\u003eWhat loudspeakers are compatible with the Matrix Audio MA-1?\u003c\/h3\u003e\n\u003cp\u003eThe MA-1 is compatible with loudspeakers presenting a load of 2 to 16 ohms in Stereo and Mono modes, covering the full range of modern passive loudspeaker designs including low-impedance floorstanders from brands such as Wilson Audio, Magico, Focal, and Bowers and Wilkins. In bridged Mono mode the minimum supported impedance rises to 4 ohms. The MA-1's damping factor of 350 at 8 ohms and its high current reserve from the 190,000µF capacitor bank make it particularly effective at controlling woofer drivers in large bass-reflex and transmission-line loudspeaker systems.\u003c\/p\u003e\n\n\u003ch3\u003eWhere can I buy the Matrix Audio MA-1 in Buffalo, NY or the USA?\u003c\/h3\u003e\n\u003cp\u003eThe Matrix Audio MA-1 is available at Vinyl Sound, located in Buffalo, New York. Vinyl Sound is an authorized Matrix Audio dealer serving customers across Western New York and the United States, with expert guidance on operating mode configuration, loudspeaker matching, and full M Series system assembly.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the MA-1's intelligent cooling system work?\u003c\/h3\u003e\n\u003cp\u003eThe MA-1 uses two temperature sensors that continuously monitor the main heatsink surface. Under normal listening conditions the amplifier operates passively without any fan activity. When the heatsink temperature exceeds a preset threshold, a 7.4-inch fan activates automatically inside an isolated internal duct that directs airflow away from circuit boards and electronic components. This ducted design prevents dust accumulation on sensitive parts and keeps fan noise effectively inaudible during typical listening sessions. Fan speed adjusts dynamically in proportion to the measured thermal load, stepping back down and eventually stopping as the heatsink cools.\u003c\/p\u003e\n\n\u003ch3\u003eWhat gain setting should I use when pairing the MA-1 with the Matrix Audio MP-1 preamplifier?\u003c\/h3\u003e\n\u003cp\u003eThe appropriate gain setting depends on the sensitivity of the loudspeakers being used and the output level of the MP-1 preamplifier. The MP-1 delivers up to 36Vrms from its XLR balanced output with +12dB of gain, which is a very high output level. In most systems with moderately sensitive loudspeakers, the MA-1's lower +24dB gain setting will provide ample output power while keeping the volume control in a more precise and usable range. The +30dB setting is better suited to low-sensitivity loudspeakers or situations where the source level is inherently low. Vinyl Sound Buffalo can advise on the correct gain configuration for a specific system.\u003c\/p\u003e","brand":"Matrix Audio","offers":[{"title":"Default Title","offer_id":53293551583539,"sku":null,"price":8999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0873\/0293\/0739\/files\/MatrixAudioMA-1PowerAmplifier_e303c168-cd1c-44bb-b27e-76bef72fdd81.png?v=1777349674","url":"https:\/\/vinylsound.com\/products\/matrix-audio-ma-1-power-amplifier","provider":"Vinyl Sound USA","version":"1.0","type":"link"}