{"product_id":"matrix-audio-md-1p-integrated-amplifier-music-streamer","title":"Matrix Audio MD-1P Integrated Amplifier Music Streamer","description":"\u003ch1\u003eMatrix Audio MD-1P Integrated Amplifier Music Streamer at Vinyl Sound Buffalo, NY USA\u003c\/h1\u003e\n\n\u003cp\u003eThe MD-1P is a flagship streaming integrated amplifier from Matrix Audio (Xi'an, China), available at Vinyl Sound in Buffalo, New York, USA. Built on the same M Series hardware platform as the MS-1 streamer, the MD-1P combines a Roon Ready network streamer, a mastering-grade DAC with dual femtosecond clock architecture, a full-featured preamplifier, and a \u003cstrong\u003e300W per channel Class D power amplifier\u003c\/strong\u003e into a single 7.6kg chassis. A \u003cstrong\u003e256-step digitally controlled analog volume system\u003c\/strong\u003e handles attenuation with no mechanical wear, while two pairs of gold-plated solid copper speaker terminals enable A\/B speaker switching by remote. The MD-1P supports native PCM up to 24-bit \/ 768kHz and DSD up to DSD512, and streams over Wi-Fi 6, Gigabit Ethernet, and Bluetooth 5.0 with LDAC, with full Roon Ready certification and support for Tidal Connect, Qobuz Connect, Spotify Connect, and AirPlay 2. It was reviewed by The Audio Tailor in February 2026.\u003c\/p\u003e\n\n\u003ch2\u003e300W Class D Amplifier with Advanced PWM Processing\u003c\/h2\u003e\n\u003cp\u003eThe MD-1P's power amplifier section delivers 300W RMS per channel into 8 ohms through a high-efficiency Class D stage employing advanced PWM signal processing technology. The output impedance measures below 3 milliohms according to The Audio Tailor's review, a figure that translates to exceptional control over speaker drivers across all frequency ranges. The amplifier's frequency response spans 20Hz to 45kHz (-3dB), and its SNR of 122dB A-weighted reflects the low noise floor achievable when digital amplification is implemented with dual femtosecond clocks and FPGA-managed jitter reduction upstream in the signal chain. Gold-plated solid copper speaker binding posts on both terminal pairs minimize contact resistance. An Amplifier Bypass mode converts the MD-1P into a pure power amplifier for integration into a multi-channel home theater system driven by an external processor.\u003c\/p\u003e\n\n\u003ch2\u003eDual Femtosecond Clocks and FPGA Digital Engine\u003c\/h2\u003e\n\u003cp\u003eThe MD-1P's DAC and streaming section shares the same digital processing architecture as the M Series flagships. Two independent femtosecond clocks provide dedicated timing references for the 44.1kHz and 48kHz sample-rate families, completely eliminating cross-domain jitter artifacts. A high-speed FPGA implements Matrix Audio's proprietary clock division and jitter reduction algorithms, delivering the timing signal to the DAC chip at a measured low phase noise floor. USB Audio input supports PCM up to 24-bit \/ 768kHz and native DSD up to DSD512 (24.58MHz), while Optical and Coaxial inputs handle PCM up to 192kHz and DSD64 via DoP. An internal NVMe SSD slot allows the MD-1P to store a local music library served over the network, giving it NAS functionality accessible to other Matrix Audio streamers on the same network.\u003c\/p\u003e\n\n\u003ch2\u003eComplete Analog Hub: Phono, XLR, RCA, HDMI ARC, and Dual Subwoofer Outputs\u003c\/h2\u003e\n\u003cp\u003eThe MD-1P consolidates every analog source connection a modern listening room requires. A built-in MM phono preamplifier with finely tuned RIAA curve, 47k ohm input impedance, and +40dB of gain allows direct turntable connection without an outboard phono stage. Balanced XLR and single-ended RCA line inputs accommodate external sources up to 8Vrms and 4Vrms respectively. An HDMI ARC input transmits audio from a television at up to 192kHz PCM, while USB Audio connects a computer directly. Dual subwoofer outputs with a 150Hz low-pass filter and synchronized volume control extend bass reinforcement to one or two active subwoofers, with a trigger output managing subwoofer power sequencing automatically. The preamp RCA output carries 2.2Vrms with SNR of 120dB A-weighted and THD+N below 0.0005%.\u003c\/p\u003e\n\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003e300W Per Channel Class D Amplifier:\u003c\/strong\u003e High-efficiency Class D output stage with advanced PWM processing delivers 300W RMS into 8 ohms with a measured output impedance below 3 milliohms, an SNR of 122dB A-weighted, and a frequency response reaching 45kHz at -3dB.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual Femtosecond Clock Architecture:\u003c\/strong\u003e Independent clocks for the 44.1kHz and 48kHz sample-rate families with FPGA jitter reduction minimize phase noise and timing error throughout the digital signal chain.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eRoon Ready Certification:\u003c\/strong\u003e Certified Roon endpoint with full hi-res PCM and DSD support, plus Tidal Connect, Qobuz Connect, Spotify Connect, AirPlay 2, UPnP\/DLNA, vTuner, and Radio Paradise.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003e256-Step Digitally Controlled Analog Volume:\u003c\/strong\u003e High-precision digital volume system with 0.5dB step resolution and a 12-step channel balance control provides perfect left-right channel consistency at all levels with no mechanical wear.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual Speaker Outputs with A\/B Switching:\u003c\/strong\u003e Two pairs of gold-plated solid copper speaker terminals support simultaneous connection of two loudspeaker pairs, switchable via IR remote for instant A\/B comparison.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDual Subwoofer Outputs:\u003c\/strong\u003e Two dedicated low-frequency outputs with a 150Hz low-pass filter and synchronized volume control enable seamless dual-subwoofer integration, with a trigger port for automatic power sequencing.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMM Phono Stage:\u003c\/strong\u003e Built-in MM phono preamplifier with RIAA equalization, 47k ohm input impedance, and +40dB gain allows direct turntable connection without an external phono stage.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eHDMI ARC Input:\u003c\/strong\u003e Accepts audio from a television at up to 192kHz PCM, consolidating TV audio into the MD-1P's volume control and speaker outputs without a separate HDMI switch or audio extractor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eAmplifier Bypass Mode:\u003c\/strong\u003e Converts the MD-1P into a pure power amplifier stage for integration into AV multi-channel systems driven by an external processor.\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eBluetooth 5.0 with LDAC and aptX HD:\u003c\/strong\u003e HD Bluetooth supports aptX, aptX HD, AAC, SBC, and LDAC codecs for wireless streaming up to 96kHz quality.\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n  \u003ctbody\u003e\n    \u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003eIntegrated Amplifier and Music Streamer\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAmplifier Class\u003c\/td\u003e\n\u003ctd\u003eClass D with advanced PWM processing\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eOutput Power\u003c\/td\u003e\n\u003ctd\u003e2x 300W RMS at 8 ohm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAmplifier Frequency Response\u003c\/td\u003e\n\u003ctd\u003e20Hz - 20kHz (±0.1dB), 45kHz (-3dB)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAmplifier SNR\u003c\/td\u003e\n\u003ctd\u003e122dB A-weighted\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eAmplifier Gain\u003c\/td\u003e\n\u003ctd\u003e+33dB\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSpeaker Terminals\u003c\/td\u003e\n\u003ctd\u003e2 pairs (A \/ B \/ A+B), gold-plated solid copper\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eCoaxial \/ Optical Input\u003c\/td\u003e\n\u003ctd\u003ePCM 16-24bit \/ 44.1kHz - 192kHz, DSD 2.8MHz (DoP)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eHDMI ARC Input\u003c\/td\u003e\n\u003ctd\u003ePCM 16-24bit \/ 44.1kHz - 192kHz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUSB Audio Input\u003c\/td\u003e\n\u003ctd\u003ePCM 16-24bit \/ 44.1kHz - 768kHz, DSD 2.8MHz - 22.4MHz (Native \/ DoP)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStreaming PCM \/ DSD\u003c\/td\u003e\n\u003ctd\u003eUp to 24-bit \/ 768kHz \/ Up to 24.58MHz (DSD512)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eXLR Line Input Impedance\u003c\/td\u003e\n\u003ctd\u003e47k ohm, max 8Vrms\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eRCA Line Input Impedance\u003c\/td\u003e\n\u003ctd\u003e47k ohm, max 4Vrms\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePhono Stage\u003c\/td\u003e\n\u003ctd\u003eMM, RIAA curve, 47k ohm \/ 100pF, +40dB gain\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePreamp Output (RCA)\u003c\/td\u003e\n\u003ctd\u003e2.2Vrms adjustable, SNR 120dB A-weighted, THD+N less than 0.0005%\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eSubwoofer Outputs\u003c\/td\u003e\n\u003ctd\u003e2x, 150Hz low-pass filter, 2.2Vrms adjustable\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eVolume Control\u003c\/td\u003e\n\u003ctd\u003e256-step digitally controlled analog, 0.5dB steps, 12-step balance control\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eBluetooth\u003c\/td\u003e\n\u003ctd\u003eVersion 5.0, aptX \/ aptX HD \/ AAC \/ SBC \/ LDAC\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eNetwork\u003c\/td\u003e\n\u003ctd\u003eGigabit Ethernet 10\/100\/1000 Mbps, Wi-Fi 6 dual-band (2.4GHz \/ 5GHz)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eInternal Storage\u003c\/td\u003e\n\u003ctd\u003eM.2 NVMe SSD slot (2230 \/ 2242 \/ 2280)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eUSB\u003c\/td\u003e\n\u003ctd\u003e1x USB 3.0 (5V \/ 1A)\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eStreaming Protocols\u003c\/td\u003e\n\u003ctd\u003eRoon Ready, AirPlay 2, DLNA\/UPnP, Tidal Connect, Spotify Connect, Qobuz Connect, vTuner, Radio Paradise\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eVoltage\u003c\/td\u003e\n\u003ctd\u003eAC 100V, 50\/60Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003ePower Consumption\u003c\/td\u003e\n\u003ctd\u003eLess than 5W standby, less than 45W idle, less than 1250W maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eDimensions (W x D x H)\u003c\/td\u003e\n\u003ctd\u003e430 x 331 x 96mm\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e7.6kg\u003c\/td\u003e\n\u003c\/tr\u003e\n    \u003ctr\u003e\n\u003ctd\u003eIncluded Accessories\u003c\/td\u003e\n\u003ctd\u003eIR remote, power cable, printed materials\u003c\/td\u003e\n\u003c\/tr\u003e\n  \u003c\/tbody\u003e\n\u003c\/table\u003e\n\n\u003ch2\u003eConnections at a Glance\u003c\/h2\u003e\n\u003cul\u003e\n  \u003cli\u003e2x Pairs Speaker Binding Posts (A \/ B \/ A+B, gold-plated solid copper)\u003c\/li\u003e\n  \u003cli\u003e2x RCA Subwoofer Output (150Hz low-pass)\u003c\/li\u003e\n  \u003cli\u003e1x RCA Preamp Output\u003c\/li\u003e\n  \u003cli\u003e1x XLR Balanced Line Input\u003c\/li\u003e\n  \u003cli\u003e1x RCA Line Input\u003c\/li\u003e\n  \u003cli\u003e1x MM Phono Input\u003c\/li\u003e\n  \u003cli\u003e1x HDMI ARC Input\u003c\/li\u003e\n  \u003cli\u003e1x USB Audio Input\u003c\/li\u003e\n  \u003cli\u003e2x Optical Toslink Digital Input\u003c\/li\u003e\n  \u003cli\u003e2x Coaxial Digital Input\u003c\/li\u003e\n  \u003cli\u003e1x USB 3.0 Port (storage)\u003c\/li\u003e\n  \u003cli\u003eRJ45 Gigabit Ethernet Port\u003c\/li\u003e\n  \u003cli\u003eWi-Fi 6 Dual-Band (2.4GHz \/ 5GHz)\u003c\/li\u003e\n  \u003cli\u003eBluetooth 5.0 (aptX HD \/ LDAC)\u003c\/li\u003e\n  \u003cli\u003eTrigger In \/ Out\u003c\/li\u003e\n  \u003cli\u003eIEC Power Input\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\n\u003ch3\u003eWhat is the Matrix Audio MD-1P?\u003c\/h3\u003e\n\u003cp\u003eThe Matrix Audio MD-1P is a streaming integrated amplifier from Matrix Audio (Xi'an, China) that combines a Roon Ready network streamer, a mastering-grade DAC with dual femtosecond clocks, a 256-step digitally controlled analog preamplifier, and a 300W per channel Class D power amplifier in a single 430 x 331 x 96mm chassis. It includes MM phono, HDMI ARC, USB Audio, coaxial, and optical inputs, dual subwoofer outputs, dual speaker terminal pairs with A\/B switching, Wi-Fi 6, Gigabit Ethernet, Bluetooth 5.0 with LDAC, and an internal NVMe SSD slot. It is available at Vinyl Sound in Buffalo, New York, USA.\u003c\/p\u003e\n\n\u003ch3\u003eHow does the Matrix Audio MD-1P compare to the Naim Uniti Nova or Lyngdorf TDAI-3400?\u003c\/h3\u003e\n\u003cp\u003eThe Matrix Audio MD-1P competes directly with high-power streaming integrated amplifiers such as the Naim Uniti Nova and Lyngdorf TDAI-3400. The Naim Uniti Nova delivers 80W per channel and uses a proprietary streaming platform without Roon Ready certification on earlier variants. The Lyngdorf TDAI-3400 offers 400W and includes RoomPerfect room correction but lacks HDMI ARC and a phono stage. The MD-1P differentiates with 300W per channel, Roon Ready certification, dual femtosecond clock architecture, MM phono input, HDMI ARC, dual subwoofer outputs with 150Hz crossover, dual speaker terminal A\/B switching, and Bluetooth 5.0 with LDAC, all in a chassis weighing just 7.6kg.\u003c\/p\u003e\n\n\u003ch3\u003eCan the Matrix Audio MD-1P drive demanding floor-standing loudspeakers?\u003c\/h3\u003e\n\u003cp\u003eYes. The MD-1P delivers 300W RMS per channel into 8 ohms from its Class D output stage, with a measured output impedance below 3 milliohms providing exceptional control over speaker drivers. This power level and damping characteristic is sufficient to drive large floor-standing loudspeakers from brands including Focal, Bowers and Wilkins, KEF, and Sonus Faber with full dynamic authority. The dual speaker terminals also allow bi-wiring capable loudspeakers to be connected to both A and B output pairs simultaneously for the A+B configuration.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is Bypass mode on the MD-1P?\u003c\/h3\u003e\n\u003cp\u003eBypass mode on the Matrix Audio MD-1P disables the internal preamplifier stage and routes an external line-level signal directly into the power amplifier section. This allows the MD-1P to function as a dedicated 300W per channel power amplifier driven by an AV processor or separate preamplifier, making it suitable for use as the front left and right channel amplifier in a multi-channel home theater system without losing the functionality of the MD-1P's built-in streaming and source switching for two-channel listening.\u003c\/p\u003e\n\n\u003ch3\u003eDoes the Matrix Audio MD-1P support vinyl playback?\u003c\/h3\u003e\n\u003cp\u003eYes. The MD-1P includes a built-in MM phono preamplifier with a finely tuned RIAA equalization curve, a 47k ohm input impedance with 100pF capacitance loading, and +40dB of gain. A turntable with a moving magnet cartridge connects directly to the MD-1P's phono input without any external phono preamplifier. The phono input is fully integrated into the MD-1P's 256-step volume control and source selection, treated identically to any other input in the signal chain.\u003c\/p\u003e\n\n\u003ch3\u003eWhat is the difference between the Matrix Audio MD-1 and the MD-1P?\u003c\/h3\u003e\n\u003cp\u003eThe Matrix Audio MD-1 and MD-1P share the same chassis, streaming platform, DAC engine, digital inputs, MM phono stage, HDMI ARC, and MA Player OS. The primary difference is output power: the MD-1 delivers 150W per channel into 8 ohms, while the MD-1P delivers 300W per channel. The MD-1P also adds a second pair of speaker binding posts for dual-speaker A\/B switching, a second subwoofer output for dual-subwoofer integration, and ships in matte black only, whereas the MD-1 is available in both silver and black finishes.\u003c\/p\u003e\n\n\u003ch3\u003eWhere can I buy the Matrix Audio MD-1P in Buffalo, NY or the USA?\u003c\/h3\u003e\n\u003cp\u003eThe Matrix Audio MD-1P is available at Vinyl Sound, located in Buffalo, New York, USA. Vinyl Sound is an authorized Matrix Audio dealer serving customers across Western New York and the United States, with expert guidance on loudspeaker matching, subwoofer integration, and complete system configuration.\u003c\/p\u003e","brand":"Matrix Audio","offers":[{"title":"Default Title","offer_id":53293572489523,"sku":null,"price":4999.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0873\/0293\/0739\/files\/MatrixAudioMD-1PIntegratedAmplifierMusicStreamer.png?v=1777343122","url":"https:\/\/vinylsound.com\/products\/matrix-audio-md-1p-integrated-amplifier-music-streamer","provider":"Vinyl Sound USA","version":"1.0","type":"link"}