PSB Synchrony T600 Tower Speakers

PSB Synchrony T600 Tower Loudspeakers at Vinyl Sound Buffalo NY

The PSB Synchrony T600 is a flagship-grade three-way tower loudspeaker from PSB's Synchrony Series, offering the same driver topology and cabinet philosophy as the Synchrony T800 in a more compact and lighter enclosure suited to medium and large listening rooms. Available at Vinyl Sound in Buffalo, New York, the T600 is a transitional three-way bass reflex design incorporating a 1" titanium dome tweeter, a 5¼" carbon fibre midrange driver, and three 6½" carbon fibre woofers in individually-tuned chambers with triple rear-firing ports. The T600 delivers a frequency response of 24Hz to 23,000Hz (±3dB), 89dB anechoic sensitivity (91dB in-room), and a nominal impedance of 4 ohms. IsoAcoustics GAIA II isolation feet are included as standard in the outrigger stabilizer base. The Synchrony T600 is part of Vinyl Sound Buffalo's full loudspeaker collection, which includes bookshelf, floorstanding, and centre channel speakers from leading audiophile brands.

Driver Configuration and Crossover Design

The PSB Synchrony T600 uses the same transitional three-way driver architecture as the T800, with die-cast aluminum basket construction on all drivers for rigidity and reduced coloration. The 1" titanium dome tweeter with ferrofluid cooling crosses over at 1,800Hz via a Linkwitz-Riley 4th-order network. The 5¼" cast basket carbon fibre midrange driver with mass-loaded rubber surround covers 450Hz to 1,800Hz, while three 6½" cast basket carbon fibre woofers — each in a discrete, individually-tuned chamber — extend bass to a measured LF cutoff of 20Hz. The crossover uses advanced components throughout, and triple five-way gold-plated binding posts support tri-wiring and tri-amplification. Two included port plugs allow bass tuning to suit room acoustics. The T600's transitional array driver layout randomizes floor bounce reflections, smoothing the overall frequency response compared to conventional vertical array designs.

Cabinet Construction and Isolation

The Synchrony T600 cabinet features extensive internal bracing and a 5mm solid aluminum front baffle to eliminate resonances and preserve fine transient detail. The internal volume is divided into four chambers — one per driver group — to eliminate standing waves and ensure even low-frequency response. Ten internal isolation cups further reduce cabinet-born colorations. The outrigger stabilizer base integrates IsoAcoustics GAIA II feet as standard, decoupling the loudspeaker from the floor and improving micro-detail retrieval, soundstage width, and imaging precision. The T600 is available in Satin Walnut Veneer and High Gloss Piano Black finishes, with a magnetically attached acoustically transparent grille included.

Specifications

Frequently Asked Questions

What is the difference between the PSB Synchrony T600 and T800?

The PSB Synchrony T600 and T800 share the same driver topology, crossover design, and cabinet philosophy, but differ primarily in woofer size and overall cabinet dimensions. The T800 uses three 8" woofers and measures 47¾" tall, while the T600 uses three 6½" woofers in a more compact 41¼" tall cabinet. The T800 extends bass 3Hz lower (21Hz vs 24Hz at ±3dB) and weighs 100 lbs compared to the T600's 77 lbs. Both include IsoAcoustics GAIA II feet as standard. The T600 is the preferred choice for medium-sized rooms where the T800's larger cabinet would be excessive.

What amplifier does the PSB Synchrony T600 need?

PSB recommends 20 to 300 watts per channel for the Synchrony T600. The nominal and minimum impedance is 4 ohms, so a high-current amplifier comfortable driving 4-ohm loads is recommended. The T600's 89dB anechoic sensitivity (91dB in-room) makes it moderately efficient and suitable for amplifiers from 50 watts upward in typical listening rooms.

Does the PSB Synchrony T600 include IsoAcoustics feet?

Yes. The Synchrony T600 includes IsoAcoustics GAIA II isolation feet integrated into the outrigger stabilizer base as standard equipment. The GAIA II feet prevent mechanical energy from the drivers and cabinet from coupling to the floor, improving micro-detail retrieval, transient clarity, and soundstage imaging. No additional purchase is required.

Can the PSB Synchrony T600 be used for home theatre?

Yes. The Synchrony T600 is well suited to both two-channel stereo listening and multi-channel home theatre applications. Its triple five-way binding posts support bi-wiring, tri-wiring, and tri-amplification for use with AV receivers or separate amplifier configurations. PSB's Synchrony Series also includes a matching centre channel and surround speakers for a full Synchrony home theatre system.

What finishes are available for the PSB Synchrony T600?

The PSB Synchrony T600 is available in Satin Walnut Veneer and High Gloss Piano Black. Both finishes are stocked by Vinyl Sound Buffalo. Contact Vinyl Sound to confirm current availability and lead times for each finish option.

Can I audition the PSB Synchrony T600 in Buffalo NY?

Yes. The PSB Synchrony T600 is available for in-store demonstration at Vinyl Sound in Buffalo, New York. Vinyl Sound is an authorized PSB Speakers dealer serving Buffalo, NY and the wider Western New York region. Contact Vinyl Sound to arrange a listening session and amplifier matching consultation.

Where to buy PSB Synchrony T600 speakers in Buffalo NY?

The PSB Synchrony T600 is available from Vinyl Sound, an authorized PSB Speakers dealer in Buffalo, New York. Vinyl Sound offers in-store demonstration, expert system matching, and shipping across the continental United States. Contact Vinyl Sound Buffalo by phone or email to purchase or arrange an appointment.